Plant 3D Generating ISO fails

Issue:
When generating and isometric from a pipe run fails and “Isometric Creation Complete” balloon shows “errors were encountered”. Selecting on “click to view isometric creation details” then select “open log file” and in the log file at the bottom you will see “An item with the same key has already been added”

Causes:
One cause is that in the Iso style template file there is more than one attribute that exists with the same attribute tag name. 

Solution:
The fix for this issue was to open the iso.dwt file and remove the duplicate attribute tags or to rename the attribute tag by adding a number to the end of the tag. After editing the attributes in the dwt file, run attsync on the title block to refresh the modifications to the attributes. Each attribute tag name must be unique name or otherwise your iso generation will fail. 

Another cause is UseSpoolNameAsDrawingName variable in the isoconfig.xml. See link
"FAILURE - An item with the same key has already been added." when generating isometric drawings in AutoCAD Plant 3D
To edit the attributes in a Plant 3D iso template file
https://resources.imaginit.com/support-blog/how-to-edit-a-plant-3d-title-block-attribute-tag

About the Author

Sr. Support Specialist<br><br>Paul is responsible for client technical support as well as the set-up and configuring of plotters; support and service calls; and the installation, demonstration, and education of clients in AutoCAD, AutoCAD Architecture, AutoCAD MEP, AutoCAD P&ID, Advance Steel, Navisworks, Raster Design, Revit Architecture, Revit MEP, Revit Structure and 3D Studio MAX. He draws upon his years of experience as a technical engineer to assist customers in the creation and implementation of standards, the set-up of plotter and pen styles and the creation of custom blocks.

Follow on Linkedin More Content by Paul Sills