Why Placing CSV Report Tables in Inventor Drawings Can Be Slow (and How to Fix It)

November 16, 2026 Harpreet Waraich

Issue: What Kind of Error Is This?

This is an OLE communication delay between Autodesk Inventor and Microsoft Excel. It shows up when a report output file, for example a CSV from the Cable and Harness environment, is placed as a table in a drawing. Even a very small file takes far longer than it should, the drawing seems to hang, and Excel keeps showing the message “Microsoft Excel is waiting for another application to complete an OLE action.” Clicking OK or Cancel does nothing to speed it up.

A CSV is plain text, but it is still opened through Excel. Placing it creates a hidden chain between Inventor, the file and Excel, and any delay in that chain stalls the whole process. This is a general issue, not one tied to a single report or file. Whenever a drawing table depends on Excel reading an external file in the background, it can be slow or fail, no matter how small the file is.

Causes: Why Does This Error Show Up?

The message means Excel sent a request to another application (here, Inventor) and is waiting for a reply that is slow or never comes. The most common reasons for that chain to stall include:

•    Excel Is Busy or Stuck: A leftover background Excel process, or the same file already open, makes each request queue up.
•    Excel Add-ins: COM add-ins load every time Excel starts in the background and can add long delays.
•    Security Prompts: Protected View or link warnings can wait for an answer in a window you can’t see.
•    Request Per Cell: If the table is built by passing each cell through Excel one at a time, every small delay is multiplied.

The exact cause depends on your setup, so treat these as the most likely suspects rather than a confirmed diagnosis.

Solutions: The primary solution is to use an XLSX file instead of a CSV.

An XLSX file is a proper workbook, so it avoids most of the hidden handling a CSV needs.

1.    Open the CSV once in Excel and use Save As to save it as an XLSX workbook, or export the report in XLSX format if your version offers it.
2.    Save it in the project folder, or another local location with a fixed path.
3.    Place the table from the XLSX file and compare the time. If it is noticeably faster, the CSV handling was the problem.
4.    If you insert the file as an object, embed it rather than linking it: leave Link unticked in the Insert Object dialog.
5.    Keep the sheet name and data range the same each time the report is regenerated.

Note: Converting to XLSX does not change your report data. It only changes the file type used to bring the table into the drawing.

If You Need to Stay with CSV or the Issue Persists

Try these steps if XLSX is still slow, or you need to stay with CSV:
1.    Close all Excel windows, then open Task Manager and end any leftover Excel processes.
2.    Excel Add-ins: Open Excel > File > Options > Add-ins. At the bottom next to Manage, select Excel Add-ins, click Go, and uncheck any active add-ins.
•    COM Add-ins: In the same Manage drop-down menu at the bottom, select COM Add-ins, click Go, and uncheck any third-party add-ins (like PDF makers, ERP tools, or Vault plugins) that could stall Excel in the background.

Menu names vary by Excel version.

If placing the table is still slow after these steps, try a fresh XLSX file saved to a local folder. If that places quickly, the problem is in how Excel is accessing the original file, not in Inventor.

About the Author

Technical Support Specialist-MSD

More Content by Harpreet Waraich

No Previous Articles

Next Article
Error when Launching Revit IMAGINiT Utilities: Revit Cannot Run the External Application

×

Get Tips Delivered.

Subscribe to Email Updates.

First Name
Last Name
Country
Thank you!
Error - something went wrong!