Inventor ordinate jogged dimensions export to AutoCAD crossing each other

May 27, 2024 Joanna Gryszka

Issue:

When exporting an Inventor drawing to AutoCAD DWG, some ordinate dimensions with a jog export out crossing each other.

For example:

Cause:

This is being investigated for a cause and a fix in this Autodesk reference article: https://www.autodesk.com/support/technical/article/caas/sfdcarticles/sfdcarticles/Not-all-jogged-ordinate-dimensions-are-not-exporting-to-AutoCAD-DWG-from-Inventor-without-crossing-jogs.html

Solution:

Temporarily moving the ordinate farther away from the drawing view before exporting to an AutoCAD DWG may help.

Drag the dimensions to extend them, the export to AutoCAD might be closer to Inventor:

Exporting the file with DIMASSOC=0 may help as well but this will create exploded AutoCAD dimensions.

About the Author

Manufacturing Technical Support Specialist<br><br>Joanna has over eight years of experience working with Autodesk products. She started supporting core AutoCAD and network installations of all Autodesk products. She now has five years of experience with Inventor. <br> She graduated from Mechanical Engineering and has been providing solutions to clients and dedicating her knowledge to the Solution Center since then.
More Content by Joanna Gryszka

AutoCAD: Sheet Set Manager Blocks with Fields become “#” when etransmitted

Cause: Wrong active Sheet Set.

Inventor Multi-body parts do not retain Mass iProperties

Inventor Iproperties, such as Mass, do not retain their value when changing between model states for multi-...

Get Tips Delivered.

Subscribe to Email Updates.

Email Address

First Name

Last Name

Country

Thank you!

Error - something went wrong!

Return to Resources

Welcome to our Hub

Inventor ordinate jogged dimensions export to AutoCAD crossing each other

Issue:

Cause:

Solution:

About the Author

Previous Article

Next Article

Solutions Beyond Software™

Inventor ordinate jogged dimensions export to AutoCAD crossing each other

Issue:

Cause:

Solution:

About the Author

Previous Article

Next Article

Most Recent Articles

How to use model checker to build data visualization dashboard with Revit and PowerBI

When You need to install an Autodesk product on a machine that has restricted or no Internet connection, here's what you need to know and do.

Having an apostrophe in the parent folder name can prevent AutoCAD Electrical BOM Export in Vault.

While installing an Autodesk product on a Windows machine, a message appears saying: "There has been an error. Error while touching C:\ProgramData\Autodesk\ODIS\AdODISInstaller.run.lock"

When generating and isometric from a pipe run fails and “Isometric Creation Complete” balloon shows “errors were encountered”.

Need to edit/rename an attribute tag within Plant 3D title block file to have the same attribute tag value in multiple locations in AutoCAD Plant 3D.

When trying to change the layer association from the layer dropdown list in the ribbon to assign to the North arrow or bar scale, the layer list will close.

When routing a duct with Design Line, the bends automatically default to a square bend for all duct sizes

This is caused by the display style being set to anything except 2D Wireframe.

This probably isn’t something that comes up very often, but in case it ever does, here is a way that you can cut a component family.

After installing Inventor Nastran, the "Autodesk Inventor Nastran" button does not appear in Autodesk Inventor under the Environment tab.

Interface built into Inventor that allows users to access commonly used company data without leaving the Inventor program.

When installing Revit you receive the error message "Autodesk Revit is already installed" despite already uninstalling Revit from your machine.

Publishing a Factory Asset in Inventor fails while trying to publish the 2D drawing. Here's what you need to know and do.

When you open a drawing in AutoCAD extensions for the first time, it will prompt you to enter basic information about the drawing, like the building and floor codes.

The drawings do not publish or appear incorrectly in the web central space console in Eptura Archibus Web Central

Use the RENAME command. Find what needs to be corrected and click on it.

Issue: layers with $ in their names. Here's what you need to know and do to fix the issue.

You will have to download the Bluebeam deployment package (MSI). This post contains all the steps you need to accomplish this.

Dashed lines are displaying as solid lines in the Revit plan view. Here's what you need to know and to to address this issue.

Solutions Beyond Software™