Utilities for Revit 2022 How to use the Renumber From Corresponding Rooms on Another Level

November 10, 2021 Jeff Lotan

Issue:

You want to know how to use the “Renumber From Corresponding Rooms On Another Level” tool within the Utilities for Revit 2022 addin.

Solution:

In this guide we’ll be using a sample file that is installed with Revit.

In Revit open the “Tehcnical_school-current_m.rvt” file from the C: \Program Files\Autodesk\Revit 2022\Samples folder:

In Project Browser Double click the “02-Floor” Floor Plan.

Zoom into the bottom left corner so you can see the Women 211 and Men 210 section.

Select the IMAGINiT tab and the Renumber dropdown and select Room Renumber

Select “Renumber From Corresponding Rooms On Another Level” and click Next.

Select “01-Entry Level” for Ref Level: and fill in both Prefix boxes as shown below then click “Propose Renumbering”.

Check the two boxes for 210 & 211 and click “Renumber”

Click Ok on the “29 room(s) were renumbered.” Dialog.

Click Ok again if you get this dialog.

 

Notice: the Women and Men room numbers changed.

Before:

After:

 

 

About the Author

Jeff Lotan

Sr. Technical Support Specialist - Licensing<br><br>I am charged with mentoring and training team members in the proper use our systems and tools, documenting NSC processes, and providing feedback and ideas to the management team towards improving the customer experience. I am also a major contributor to our technical support blog and internal knowledge base.

Follow on Linkedin More Content by Jeff Lotan
Previous Article
DGN Attach or Import fails  with message cannot find DLL
DGN Attach or Import fails with message cannot find DLL

This problem is generally caused by an issue with an underlying set of programming or the AutoCAD settings ...

Next Article
Desktop Connector: Civil 3D Files “Failure gathering references. The reference files(s) may have been deleted or you may not have read permi