In this Blog I wanted to show how within Autodesk Civil 3D, Offset Alignments are dynamically linked to a “parent” Alignment. This makes them perfect for defining linear geometry that would otherwise need to be redrawn as a design change. Widenings can use offset Alignments to accommodate things like turn lane transitions. No matter how offset Alignments are defined, they will always maintain a geometric relationship with their parent Alignment. This saves time from rebuilding the offsets on future design modifications.
Build Offset Alignments
Use the Offset Alignment command to build your Offset Alignments. Then define your offsets on the Create Offset Alignment dialog.
You have now created your Offset Alignments. They maintain a dynamic relationship with centerline Alignment.
Use the Add Widening command to create the control line for the lane widening.
Set the widening and transition parameters, remember that the distance is from your parent Alignment. You can use the grips or dialog to adjust your transition. Also, use the add + grip to add a widening to a widening. You can have a linear or curved transition.
You now have an Offset Alignment you can use to control your lane widenings that is dynamic as you can see below.
Using dynamic offsets will save you a lot of time when building them for your control and your design updates.
About the AuthorFollow on Linkedin More Content by Richard Morrow